Cars Interior And Exterior Vinyl Wraps PPT

Cars interior and exterior vinyl wraps. Introduction. Have a plan. Prepare and clean. Take measurements and cut. Lay the wrap. Squeegee and heat gun. Cut the vinyl wrap. Tuck the edges. Heat the wrap and done. Tools for this job. Squeegee. Olfa sac. Porter-cable heat gun. Dish soap and isopropyl alcohol. Conclusion. Terminų anglų-lietuvių žodynas. Sources. Thank you for your attencion.

Car vinyl wraps are well known these days. It is a unique way to change vheicles appearece without painting it. You can choose from solid colors, chrome, multiple colour paterns and textures vinyls. To achieve good quality vinyl wrap it requires a lot of preparation, patience and diligence.

It‘s important to measure and map your vehicle surface and amount of vinyl needed. Add extra 10 percent of vinyl in case of mistakes. Inspect vehicle surface for potential problem areas like curves that create extra tension, paint or body problems that can affect the wrap and stand out when vinyl is applied.

Remove blocking parts that can block you from applying a clean wrap, like trim liners, moldings, handles. Prepare all necesary tools required to apply vinyl wrap.

Once the vinyl is smooth, it’s time to remove the excess material. Be careful that the vehicle‘s paint is under the wrap, so try not to damage paint. Excess vinyl wrap should be left about half a centimeter.

If you have too much tension in the vinyl it could tear, especially if your panel is a curved edge. So use the heat gun to realease some tension, get rid of any wrinkles left and tuck it in.

Plastic with felt edge. Adds option to replace soft edge. Most commonly used squeegees. Price: 4 euros.

Durable and small knife. 30 degree blades. Price: about 8 euros.

Any dish soap is good enough to clean most of dirt and crud. Isopropyl alcohol 70% and above is excelent for grease and any left residue removal. About 2 euros for dish soap. About 10 euros for isopropyl alcohol.

In summary the job is preaty long that requires patience and devotion. But only few tools are necessary to begin with car vinyl wraps, includin the vinyl itself. If everything is done with proper preparetion then the wrap can last from five to seven years.